Buffalo WLI-TX4-G54HP Manual de usuario descargar pdf (Pagina 18)

MAC Address - By default, the Ethernet Converter transmits

itsownMACaddress,butyoumaychangethissothatit

transmitstheMACaddressoftherstdevicepluggedintoit

totransmitadatapacket.

SSID-IntheSSIDeld,entertheSSIDnameofthewireless

networkthattheEthernetConverteristoconnectwith.Use

thesameSSIDasyourrouter/accesspoint.Youmaynd

available broadcasting SSIDs by pressing the Search button.

Wireless Network Type-ChoosebetweenInfrastructure

(AccessPointBased)orAd-hoc(ClienttoClient).

Wireless Channel-ThechannelwillbeautomaticallyselectedinInfrastructurenetworks.

ForAd-hocnetworks,bothclientsmustbesettothesamechannel.

Wireless Mode-ThewirelessmodeonlyappliestoAd-hocconnections.IftheEthernet

ConverterismakinganAd-hocconnectionwithan802.11bclient,thenselect802.11b

fromthedropdownmenu.Ifan802.11gclientisconnectingtotheEthernetConverter

then select the Auto-802.11g-802.11b option.

BSS Basic Rate Set - The basic rate set only applies to Ad-hoc connections. Select the

properratesetfortheAd-hocclienttheEthernetConverterisgoingtoassociatewith.

Older routers may require that you reduce the BSS Basic Rate set to Default(11b). If you

are unsure of the correct setting, try Default.

Wireless Settings

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Sin comentarios

Buffalo WLI-TX4-G54HP Manual de usuario Pagina 18