Buffalo WZR-AGL300NH Especificaciones descargar pdf (Pagina 2)

Buffalo WZR-HP-G300NH - DD-WRT Wiki

http://dd-wrt.com/wiki/index.php/Buffalo_WZR-HP-G300NH#Working_.2F_Not_Working_Features[10/25/2010 1:00:10 PM]

[edit]

reverting the firmware.

DD-WRT on Buffalo WZR-HP-G301NH (Japanese version)

The official DD-WRT release cannot be pushed by web upload onto the Japanese WZR-HP-G301NH original Buffalo

firmware. Buffalo Japan added a "safeguard" that checks for Japanese firmware and rejects western firmware. For

people with a Japanese router, see the following two sites for details.

http://www.dd-wrt.com/phpBB2/viewtopic.php?

t=63820&postdays=0&postorder=asc&highlight=13977&start=90

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=66494&postdays=0&postorder=asc&start=30

Old install procedure (now obsolete)

Installing DD-WRT

Installing using Linux (Ubuntu)

Original post by ERamseth. Read it here

Some commands and notes edited and optimized by Chalkos.

Setting Up

To do this you can use Ubuntu 9.04 Desktop Live CD

1. Get the DD-WRT

here (this is v24-sp2 (02/03/10) std - build 13832).

You'll want the file ending in ".tftp"

2. Get TFTP app

1. On ubuntu enable Universe repositories

2. Update repositories using

3. Use

3. Do the Hard reset or 30/30/30 on your router.

4. Unplug all ethernet cables and the power cable.

5. Connect your computer through ethernet directly to your router but leave the router turned off.

6. Disable NetworkManager. In Ubuntu 9.10, run

Or, in Ubuntu 10.04, run

7. Set IP of ethernet interface to "192.168.11.2". In Ubuntu, run

(assuming eth0 is your ethernet interface)

8. set netmask to "255.255.255.0" I think this is default but just to be safe, run

9. Make entry in the ARP table corresponding to the router. run

sudo apt-get update

sudo apt-get install tftp

sudo service networking stop

sudo service network-manager stop

sudo ifconfig eth0 192.168.11.2

sudo ifconfig eth0 netmask 255.255.255.0

1 2 3 4 5 6

Sin comentarios

Buffalo WZR-AGL300NH Especificaciones Pagina 2