Buffalo AirStation Manual de usuario descargar pdf (Pagina 70)

Chapter 6 Trouble Shooting

WLAE-AG300N User Manual 69

Place your AirStation and wireless devices 2 - 10 feet apart.•

Restart your AirStation.•

You forgot AirStation's SSID, Encryption Key, or

Password.

Hold down the reset button on the base of your AirStation for 3 seconds to initialize its settings. All

settings, including your password, SSID, and encryption key will be initialized to their defaults. The

factory defaults are:

SSID - The AirStation’s MAC address (printed on the label)

Encryption Type - WPA/WPA2 mixed mode - PSK (Connect with either WPA-PSK TKIP or

WPA2-PSK AES).

Encryption Key - Printed on the label of the AirStation.

(Encryption is disabled by default for Asia Pacic AirStations.)

The link speed is slower than 300 Mbps (Maximum

link speed is only 130Mbps).

By default, the AirStation’s 300 Mbps mode is not enabled. You may enable it with the following

procedure:

1. Open the conguration interface (See chapter 4).

2. Click [Wireless SSID & Channel (11n 300 Mbps Mode)] in Easy Setup.

3. Change the value in [300 Mbps Mode] - [Band Width] to 40 MHz and click [Apply].

If you still cannot connect at 300 Mbps, check the settings of your wireless client device.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 97 98

Sin comentarios

Buffalo AirStation Manual de usuario Pagina 70